wwShears2JRTL are pleased to be able to offer the William Whiteley Range of Hand Shears, manufactured & ground in the UK.  These can be tailored for specific materials, so if you have any specialist requirements please contact us / send samples accordingly.

 

The range includes the following:

(1).  10 inch Hand Shear :

  • 3700K-10/R : 10 inch Aramid Shear with Round Tip - 4.75” cut - Suitable for; “wet” processes, all thicknesses, off-set handles for bench operation
  • 3760G-10/R : 10 inch Glass Fibre Shear with Round Tip - 4.75” cut - Suitable for; “wet” processes, all thicknesses, off-set handles for bench operation
  • 3770C-10/R : 10 inch Carbon Shear with Round Tip - 4.75” cut - Suitable for; “wet” processes, all thicknesses, off-set handles for bench operation

Sharp Point available, product code: /S

& left handed available for the above, eg:

  • 3770C-10/LH/R - 10 inch Carbon Left Handed Shear with round or sharp point
  • 3770C-10/LH/S - 10 inch Carbon Left Handed Shear with round or sharp point

(2).  8 inch Hand Shear - long cut :

  • 3600K-8/S : 8 inch Aramid Shear with Sharp Tip - 3” cut - Suitable for; wet processes, trimming in confined spaces
  • 3660G-8/S : 8 inch Glass Fibre Shear with Sharp Tip - 3” cut - Suitable for; wet processes, trimming in confined spaces
  • 3670C-8/S : 8 inch Carbon Shear with Sharp Tip - 3” cut - Suitable for; wet processes, trimming in confined spaces

(3).  8 inch Hand Shear - short cut :

  • 3500K-8/S : 8 inch Aramid Shear with Sharp Tip - 2” cut - Suitable for; wet processes, high leverage/short cut for difficult/tough operations
  • 3560G-8/S : 8 inch Glass Fibre Shear with Sharp Tip - 2” cut - Suitable for; wet processes, high leverage/short cut for difficult/tough operations  
  • 3570C-8/S : 8 inch Carbon Shear with Sharp Tip - 2” cut - Suitable for; wet processes, high leverage/short cut for difficult/tough operations 
  • 3580D-8/S : 8 inch Dyneema Fibre Shear with Sharp Tip - 2” cut - Suitable for; wet processes, high leverage/short cut for difficult/tough operations - unique profile for cutting Dyneema

(4).  All composites & fibre optics trimming & finishing shear:

  • 8100-6.25 : 1.75” cut - Comfortable moulded handles.  Suitable for; lighter
    operations, threads & fibres, trimming & finishing
  • 8200-5.5 : 1.75” cut - Comfortable moulded handles.  Suitable for; lighter
    operations, threads & fibres, trimming & finishing

& for Stainless Steel wire & plate (easily up to 0.2 mm – 200 micron):

(5).  Hand Shear Type RTSN101-12, 12" (30.5cm) lightweight tinsnip + Type RTSN101-12/RB Replacement Blades.  Other options available - contact us for more details. 

pdfClick here to download data sheet

To arrange a demonstration or for more information contact us.

Language Selection

English French German Italian Portuguese Russian Spanish

Accreditations

iso9001